Exposure Time Calculator (ETC)
|Table of Contents|
This page provides information about the WEAVE ETC.
This is the exposure time calculator (ETC) for WEAVE.
The current Python 3.X version is v5.0, dated 6 January 2021. Throughput values represent as-built estimates for most components (as of November 2020). Please test!
The current Python 2.7 version is v18.104.22.168, dated 1 September 2020. Note that the throughput values represent the best estimates as of February 2018 (to be updated ASAP!).
v22.214.171.124: Minor bug fix version – fixed typo in help string (thanks Rubén García Benito).
v4.2.4: The optional "-LIFU" switch has been added to correctly alter the resolution and fibre size. Note however that binning isn't (easily) available in this version, so the noise reflects unbinned observations.
v4.2.3: Seeing is handled more appropriately: now the seeing parameter reflects the actual seeing, which is then convolved with the typical PSF of the corrector assembly (unlike in previous versions, where the seeing was the achieved image diameter at the fibre).
Python 3.X version:
Download and unpack v5.X, then run
% ./signalWEAVE -h
to see how to run.
Python 2.7 version:
Download and unpack v126.96.36.199 then run as
% ./signalWEAVE <optional switches> <magnitude or surface brightness> <exposure time in seconds>
Notation: <> represents a number required on input
If no exposure time is given, the ETC assumes a single 18 minute exposure.
choose ONE of
Fibre mode (optional)
Object/observing conditions parameters
-band <filter of magnitude or surface brightness> [default: V] (choices: UBVRI)
-X <airmass> [default: 1.2]
-sky <surface brightness of sky between the lines> [default: 22.7 mag/sq. arcsec in B band]
-skyband <band of interest for sky background> [default: B] (choices: UBVRI)
-profile <seeing profile> [default: Moffat] (choices: Gaussian or Moffat)
-betam <beta of Moffat profile> [default: 2.5] (only if profile is Moffat)
-FWHM <full width at half maximum of seeing disk> [default: 0.95]
-readnoise <RN in e-> [default: 2.5]
-dark <dark current in e-/hour> [default: 0.]
-offset <offset of fiber center from object center in arcseconds> [default: 0.1]
-sb (switch to set input as surface brightness in mag./sq. arcsec instead of point source magnitudes)
Return values should be self-explanatory.
Note that the defaults now give a S/N that is approximately twice that of version 188.8.131.52, due to the fixed computation of the Moffat profile (Scott offers his deepest apologies for this mistake, but hey! twice the S/N!). Note that using the Gaussian profile instead gives comparable results.